Matco ALC45 TWIN

Matco ALC45 TWIN volautomatische palletwikkelaar
Request for quotation


Matco Draaitafel

Turntable ø

Matco Draaitafel Snelheid

Turntable speed
45 rpm

Matco Belastbaar Gewicht

Max. load
depending on transport system

Matco Maximale Wikkelhoogte

Max. wrapping height
2400 mm

Matco Maximale Palletgrootte

Max. pallet
1200 x 1200 mm

Matco Capaciteit

Up to 130 pallets per hour

Matco Foliewagen Snelheid

Film Carriage speed
Frequency controlled

Matco Voorrek/Folierem

Film brake
Powered pre-stretch

Matco Machine Gewicht


Matco Voedingsspanning

Supply Voltage
3 x 400V / 50 Hz / N + PE

Do you want to wrap pallets with stable and unstable loads with a double rotating arm for extra capacity? Then the fully automatic ALC45 TWIN pallet wrapper from Matco is exactly what you are looking for. This top wrapper achieves the high rotation speed of 45 revolutions per minute and thanks to the double rotating arm, the machine can wrap 130 pallets per hour. Our own engineering department will be happy to customise the robust wrapper, including the transport system. Thanks to the perfect adjustment of the speed of the rotating arm and the film consumption by the driven pre-stretch system, you always achieve the desired wrapping result. The ALC45 TWIN pallet wrapper is the result of years of development in the field of wrapping machines and is regarded as the showpiece of the Matco wrappers.

Double arm for extra capacity

Thanks to the double arm, the wrapping cycle can be carried out in half the time. It is also possible to have one film carriage with transparent and one film carriage with black film. The production can then wrap in transparent and black film. The information for this is taken from your ERP system, for example.

When the film from one film carriage is exhausted when using a double arm, the machine automatically switches over to a single arm. The production therefore continues, albeit at a lower capacity. This gives the operator a response time. After changing the film roll, the machine continues with a double arm. Our Matco engineers will be happy to develop this in cooperation with you.

10 different wrapping programs possible

This fully automatic pallet wrapper with rotating arm is perfect for products that are not suitable for turning, for example because they are too light or unstable. The ALC45 TWIN is easy to operate with a touch panel, on which ten different wrapping programs can be set. Because of this you are not bound to one type of pallet load.

A weighing unit saves costs 

We can place a weighing unit in the transport system of this ALC45 TWIN pallet wrapper if wanted. The exact weight of the load must be known, especially for transport in overseas containers. Thanks to our integrated scale, you no longer need to perform any separate operations. We can connect a display or a printer, but also communicate with a WMS: the choice is yours. This gives optimal return on your investment. Your wishes are our starting point.

We are happy to offer you a tailor-made solution

Do you want a combination with a lift to get the pallets at the right height for wrapping? Or do you want the roller conveyor at the right height for setting up with an EPT? Do you necessarily need certain dimensions, so that the machine has to be adjusted? Of course, we can help you with that by carrying out the machine the way you want it. We can also use the machine to scan, measure height and label. We are happy to offer custom-made solutions for your situation. Our own mechanical and electrical engineers are at your service. Just as our own CE team guarantees safety. We make all calculations and software ourselves, so we are completely independent. 

Are there certain dimensions that we have to take into account when designing the machine? Do you want it to be linked to certain systems that you already use in the production or logistics process? Or do you perhaps have wishes from your employees about the user interface or the ergonomic aspects? In all these cases, we can be of perfect service to you. Just let us know and we will take care of it. 

Our customers are very happy with the connection to an ERP system, labeller or other system that we provide. Everything is possible, our software can communicate with any system you have. Also, the interface is exactly as you want it. We program everything to measure for you on location. 

Rely on top quality

We always want to offer top quality. That’s what we’ve been standing for, for over 40 years. That is why all our fully automatic pallet wrappers, including this ALC45 TWIN, are equipped with frequency-controlled SEW motors, Allen-Bradley or Siemens PLC and Festo pneumatics. Our own experts take care of the design, assembly, programming, testing and commissioning of the wrappers. We supervise the entire process during production and our project manager will keep you informed of each step. This enables us to provide you with the best possible service, even before the machine is actually delivered.

And don’t forget the ability of our employees to think along with you. For example, do you want to know what the optimal load stability is? Our experts will be happy to advise you. In this way, you can always make efficiency improvements, both now and in the future. 

Guaranteed load security

The ALC45 TWIN makes it possible to comply with load security. When the pallet is transported by truck, the load is secured to the pallet. This prevents the load from coming loose from the pallet for which you, as the manufacturer, are responsible. 

Maintenance of your ALC45 TWIN

The downtime of a pallet wrapper costs money. Especially if your entire production depends on that one machine. Therefore, it is very important to carry out preventive planned maintenance. We will make agreements with you about this at an early stage. We want you to benefit from your investment for as long as possible.

Just like our fully automatic pallet wrappers, their maintenance is also made to measure. You can always count on fast service, because we have no less than 20 service engineers on the road. So, there is always a specialist near you. Since we have designed and built the machines ourselves, we can switch very quickly when maintenance is needed. We prefer to have remote access to your system, so that we can carry out predictive maintenance when it suits best

Minimise downtime

Maintenance contract

We know how your machine works, because we designed and built it ourselves. That is the great advantage of a maintenance contract with Matco.

Back to overview